The finished wall is corrugated metal sheeting. This will create a great reflective surface for the plants. We installed a water faucet and ran the line on the inside (so as not to worry about the line freezing) of the building that goes through the wall to an outdoor sink.
The vapor barrier we are placing on the inside.
Here I needed to sew the insulation batts together since the perlins were more than the width of the insulation. I used one foot long needles and nylon string.
Placing the insulation is a very messy job, I always wear goggles, face mask and cover up my body completely with scarves and gloves. The fiberglass is very itchy and you don't want to get any on your skin or eyes.
The finished wall is corrugated metal sheeting. This will create a great reflective surface for the plants. We installed a water faucet and ran the line on the inside (so as not to worry about the line freezing) of the building that goes through the wall to an outdoor sink.
The vapor barrier we are placing on the inside.
Here I needed to sew the insulation batts together since the perlins were more than the width of the insulation. I used one foot long needles and nylon string.
Placing the insulation is a very messy job, I always wear goggles, face mask and cover up my body completely with scarves and gloves. The fiberglass is very itchy and you don't want to get any on your skin or eyes.
No comments:
Post a Comment