To run electricity from the panel to the studio, we first had to install conduit underground for the electrical wire to safely pass through. Code for where we live is 18 inches below grade.
First I laid out the conduit exactly how it had to be placed in the ground. I then marked with a magic marker the joints I would need to glue by marking a straight line across the joint so as I know exactly how to line up the joint before I glue it. I then Mark a deep cut in the ground underneath the pipe so I know where to dig a ditch.
I moved the pipe to the side a few feet and proceeded to dig a ditch about 4 inches wide by 22 inches deep. I used a special shovel that is meant for this purpose, it is 4 inches wide and angled so you can easily lift the dirt out of the ditch.
From the markings I made, I proceeded to glue the joints together above ground.
I then placed the pipe in the ground and adjusted it in places by taking more dirt out of the ditch.
No comments:
Post a Comment